# .. -*- Makefile -*-

# ******************************************************
# Generic makefile for document processing with docutils
# ******************************************************

# This file provides typical rules for processing documents with docutils.  By
# default it provides common targets (`all`, `pdf`, `clean`, etc.) for
# processing all ``*.rst`` files in this directory.

# You should be able to customize just about everything by setting variables
# defined here (they all have defaults and are documented in comments).  You
# can set them on make's command line or by building your own makefile that
# sets them before including this one.  For simplest cases, you'd want to give
# `DOCS` and perhaps `ALL`.
#
# Some things can be customized per document with make's
# per-target/per-pattern variable assignment syntax, e.g. ``mydoc.ps: FLAGS +=
# --no-doc-title``.  Unfortunately this won't work for any variables that
# affect rules sources/targets (in particular, extension variables and
# variables that enable pre/postprocessing).

# If you want deeper customization or to integrate this into your makefile(s)
# for other things, you can make it very include-friendly by flipping a few
# settings:
#
# - All variables can be put in a "namespace" by setting the variable
#   `docutils.` (note the dot!) to the desired prefix.  In comments, variable
#   names are given without the prefix.
#
# - The non-pattern common targets and, to a lesser degree, the LaTeX rules
#   might conflict with your rules.  You can disable them by setting
#   `ENABLE_COMMON_TARGETS` and/or `ENABLE_LATEX_RULES` to ``0``.
#
#   - The most common targets, like `all`, don't have commands but depend on
#     targets like `docutils.all` that do the real work.  This way they are
#     automatically merged with your dependencies and commands for the same
#     name.

# This file should be self-documenting; read it file for the full list of
# customizable variables and other gory details...

# GNU Make is required!  Some targets use common unix utils.

# The latest version of this file lives at
# http://docutils.sourceforge.net/sandbox/cben/make/Makefile.docutils

# "Namespace"
# ***********

# All variables defined in this file can be optionally prefixed with anything
# you want (e.g.  ``DOCUTILS.``) to avoid namespace pollution.  To enable
# this, set the variable `docutils.` (note the period in the variable name) to
# the desired prefix.  Note that then, you would have to use the prefix when
# setting any variables that affect this file...
docutils. ?=
##docutils. ?= DOCUTILS.

# Pattern rules - very include-friendly makefile portion
# ******************************************************

# This part is designed to be included in makefiles.  It supplies implicit
# pattern rules for docutils' tools.  All that is left to you is to request
# building of files with extensions of the output formats (.html, .tex, .dvi,
# .ps, .pdf).  You should have (or be able to build) input files with .rst
# extension.  Almost everything (including extensions) is configurable by
# setting variables defined in this file.  You should set these variables
# before including this file to avoid problems.

# If you also want typical explicit rules for targets like ``html``, ``dvi``
# and ``clean`` to build associated files, you will find them in later
# sections...

# Tool names
# ==========

# `TOOLS` lists the tools / processing stages that are supported and have [at
# least some] associated variables according to the conventions below.  It
# provides some introspection ablity, currently used in the `docutils.clean`
# target for computing the list of output extensions.
$(docutils.)TOOLS += RST2HTML PEPTOOL RST2LATEX RST2PDFLATEX		\
		     MATHHACK IMGMATHHACK				\
		     HTML_WILD_EXTS LATEX_WILD_EXTS PDFLATEX_WILD_EXTS

# As accustomed in makefiles, tool names can be customized by setting
# variables named after the tools.  Here they are slightly more systemathic
# than their current names.

# ``html.py`` is expected to be renamed to ``rst2html.py`` soon.
ifneq "$(shell which rst2html.py)" ""
$(docutils.)RST2HTML ?= rst2html.py
else
$(docutils.)RST2HTML ?= html.py
endif

$(docutils.)RST2LATEX ?= rst2latex.py

# ``rstpep2html.py`` is the RST PEP -> HTML converter tool;
# ``pep2html.py`` also supports old PEP format and does extra PEP
# services.
$(docutils.)RSTPEP2HTML ?= rstpep2html.py

$(docutils.)PEPTOOL ?= pep2html.py

# In this makefile I use only PEPTOOL (too bad RSTPEP2HTML doesn't support the
# old pep format, it has a better command-line interface).

# More such variables appear in the pre/postprocessing sections below.

# @@@ TODO: Support other tools, e.g. RST2XML.

# Extensions
# ==========

# For simplicity, only one source extension is supported at a time.  If you
# need to allow several (e.g. ``.txt`` and ``.rst``), you should be able to
# call make recursively several times, setting `SRCEXT` to a different value
# each time...
$(docutils.)SRCEXT ?= .rst

# There are various reasons to preprocess/postprocess docutils.  This makefile
# directly supports some ways and should play nice with others.  It's more
# convenient to use intermediate files than pipes (because then you can easily
# inspect them for debugging).  So we need a way to insert intermediate files
# into the dependency chain.  Solution: variables (`<toolname>.SRCEXT` and
# `<toolname>.TRGEXT`) that control the source/target extensions of each rule.
# These variables must be set before the rules that use them.
$(docutils.)PEPTOOL.SRCEXT ?= $($(docutils.)SRCEXT)
$(docutils.)PEPTOOL.TRGEXT ?= .html
$(docutils.)RST2HTML.SRCEXT ?= $($(docutils.)SRCEXT)
$(docutils.)RST2HTML.TRGEXT ?= .html
$(docutils.)RST2LATEX.SRCEXT ?= $($(docutils.)SRCEXT)
$(docutils.)RST2LATEX.TRGEXT ?= .tex

# PDFLaTeX might need different processing and extension (in particular
# because no image format is supported by both it and LaTeX).  This is sort of
# a hack: pretend we have a separate RST2PDFLATEX tool.
$(docutils.)RST2PDFLATEX.SRCEXT ?= $($(docutils.)RST2LATEX.SRCEXT)
$(docutils.)RST2PDFLATEX.TRGEXT ?= .pdftex

# Specific preprocessing/postprocessing support
# ---------------------------------------------

# The extension manipulation is subtle.  It's important to use simple
# variables (set with ``:=``) to allow chaining.  Since each processing stage
# can be enabled independently of others, they can only be attached to the
# main tool (e.g. RST2HTML).

# Note that PEPTOOL is not supported here because non-standard processing is
# not a good idea in PEPs anyway.  Won't be a big problem to add if needed...

# @@@ TODO: Support as many external/sandbox tools as possible.

# sandbox/cben/rolehack math preprocessing hacks
# ..............................................

# This makefile provides rules that support preprocessing by
# `<../rolehack/mathhack.py>`_ and `<../rolehack/imgmathhack.py>`_.  Set
# `ENABLE_MATHHACK` to 1 to run them before rst2html.py and rst2latex.py.
$(docutils.)ENABLE_MATHHACK ?= 0

$(docutils.)MATHHACK.SRCEXT := $($(docutils.)RST2LATEX.SRCEXT)
ifeq "$(origin $(docutils.)MATHHACK.TRGEXT)" "undefined"
$(docutils.)MATHHACK.TRGEXT := $($(docutils.)RST2LATEX.SRCEXT).mathhack
endif

# In theory, IMGMATHHACK is applicable to all tools.  It's not very useful
# with anything but RST2HTML, so that's the only one we attach to currently...
$(docutils.)IMGMATHHACK.SRCEXT := $($(docutils.)RST2HTML.SRCEXT)
ifeq "$(origin $(docutils.)IMGMATHHACK.TRGEXT)" "undefined"
$(docutils.)IMGMATHHACK.TRGEXT := $($(docutils.)RST2HTML.SRCEXT).imgmathhack
endif

ifeq "$($(docutils.)ENABLE_MATHHACK)" "1"
$(docutils.)RST2LATEX.SRCEXT := $($(docutils.)MATHHACK.TRGEXT)
$(docutils.)RST2HTML.SRCEXT := $($(docutils.)IMGMATHHACK.TRGEXT)
endif

# If any preprocessing has been applied, it's good to tell docutils the name
# of the original file.  But in current docutils, ``--source-url`` forces on
# ``--source-link``.  So you can control this option, per tool.
$(docutils.)RST2LATEX.ENABLE_SOURCE_URL ?= 0
ifeq "$($(docutils.)RST2LATEX.ENABLE_SOURCE_URL)" "1"
$(docutils.)RST2LATEX.FLAGS += --source-url=$*$($(docutils.)SRCEXT)
endif

$(docutils.)RST2HTML.ENABLE_SOURCE_URL ?= 0
ifeq "$($(docutils.)RST2HTML.ENABLE_SOURCE_URL)" "1"
$(docutils.)RST2HTML.FLAGS += --source-url=$*$($(docutils.)SRCEXT)
endif

# You can set `MATHHACK_DIR` to provide an explicit location for these scripts
# (you must include a trailing slash!).  You can also change the tool name
# variables completely...
$(docutils.)MATHHACK_DIR ?=
$(docutils.)MATHHACK ?= $($(docutils.)MATHHACK_DIR)mathhack.py
$(docutils.)IMGMATHHACK ?= $($(docutils.)MATHHACK_DIR)imgmathhack.py

%$($(docutils.)MATHHACK.TRGEXT): %$($(docutils.)MATHHACK.SRCEXT)
	$($(docutils.)MATHHACK) $< $@

%$($(docutils.)IMGMATHHACK.TRGEXT): %$($(docutils.)IMGMATHHACK.SRCEXT)
	$($(docutils.)IMGMATHHACK) $< $@

# Rudimentary adaptation of ``.*`` file extensions to output format
# .................................................................

# Docutils currently doesn't support referencing different files depending on
# on the output format (e.g. LaTeX requires EPS images but HTML supports
# everything else).  Here are simple sed scripts, converting ``.*`` to one
# extension for images and one for links, different for each tool.  **Be
# warned that the regexps are not bullet-proof and could be confused!**

# Set `ENABLE_WILD_EXTS` to 1 if you want to enable them.
$(docutils.)ENABLE_WILD_EXTS ?= 0

# This is an arbitrary guess, quite probable that you would want to change it.
$(docutils.)HTML_WILD_EXTS.IMGEXT ?= .png
# ``.htm`` is also widespread but here we mostly talk about local files
# produced with docutils.
$(docutils.)HTML_WILD_EXTS.LINKEXT ?= .html

# LaTeX only undestands Encapsulated PostScript.
$(docutils.)LATEX_WILD_EXTS.IMGEXT ?= .eps
# LaTeX is just as well convertible to PS but only PDF supports links, so this
# is a good guess...
$(docutils.)LATEX_WILD_EXTS.LINKEXT ?= .pdf

# PDFLaTeX understands common formats like PNG but doesn't understand EPS!
$(docutils.)PDFLATEX_WILD_EXTS.IMGEXT ?= .png
# Again, PDFLaTeX supports links.
$(docutils.)PDFLATEX_WILD_EXTS.LINKEXT ?= .pdf

# Intermediate extensions:
$(docutils.)HTML_WILD_EXTS.SRCEXT ?= .html.wild_exts
$(docutils.)LATEX_WILD_EXTS.SRCEXT ?= .tex.wild_exts
$(docutils.)PDFLATEX_WILD_EXTS.SRCEXT ?= .pdftex.wild_exts

# Chain to the tools.
$(docutils.)HTML_WILD_EXTS.TRGEXT := $($(docutils.)RST2HTML.TRGEXT)
$(docutils.)LATEX_WILD_EXTS.TRGEXT := $($(docutils.)RST2LATEX.TRGEXT)
$(docutils.)PDFLATEX_WILD_EXTS.TRGEXT := $($(docutils.)RST2PDFLATEX.TRGEXT)

ifeq "$($(docutils.)ENABLE_WILD_EXTS)" "1"
$(docutils.)RST2HTML.TRGEXT := $($(docutils.)HTML_WILD_EXTS.SRCEXT)
$(docutils.)RST2LATEX.TRGEXT := $($(docutils.)LATEX_WILD_EXTS.SRCEXT)
$(docutils.)RST2PDFLATEX.TRGEXT := $($(docutils.)PDFLATEX_WILD_EXTS.SRCEXT)
endif

%$($(docutils.)HTML_WILD_EXTS.TRGEXT): %$($(docutils.)HTML_WILD_EXTS.SRCEXT)
	sed -e 's/\( [sS][rR][cC]="[^"]*\)\.\*"/\1$($(docutils.)HTML_WILD_EXTS.IMGEXT)"/g' -e "s/\( [sS][rR][cC]='[^']*\)\.\*'/\1$($(docutils.)HTML_WILD_EXTS.IMGEXT)'/g" -e 's/\( [hH][rR][eE][fF]="[^"]*\)\.\*"/\1$($(docutils.)HTML_WILD_EXTS.LINKEXT)"/g' -e "s/\( [hH][rR][eE][fF]='[^']*\)\.\*'/\1$($(docutils.)HTML_WILD_EXTS.LINKEXT)'/g" $< > $@

%$($(docutils.)LATEX_WILD_EXTS.TRGEXT): %$($(docutils.)LATEX_WILD_EXTS.SRCEXT)
	sed -e 's/\(\\includegraphics{[^}]*\)\.\*}/\1$($(docutils.)LATEX_WILD_EXTS.IMGEXT)}/g' -e 's/\(\\href{[^}]*\)\.\*}/\1$($(docutils.)LATEX_WILD_EXTS.LINKEXT)}/g' $< > $@

%$($(docutils.)PDFLATEX_WILD_EXTS.TRGEXT): %$($(docutils.)PDFLATEX_WILD_EXTS.SRCEXT)
	sed -e 's/\(\\includegraphics{[^}]*\)\.\*}/\1$($(docutils.)PDFLATEX_WILD_EXTS.IMGEXT)}/g' -e 's/\(\\href{[^}]*\)\.\*}/\1$($(docutils.)PDFLATEX_WILD_EXTS.LINKEXT)}/g' $< > $@


# Config files and extra flags
# ============================

# Consider using config files instead of flags for most tasks.  To specify
# config file(s) other than the default, set `CONFIG` to a space-separated
# list of them.  Later files override earlier ones (and all override the
# `DOCUTILSCONFIG` environment variable, which you should *not* touch in a
# Makefile, it's for the user).  Non-existant config files are ignored.
#
# Relative file names in `CONFIG` are relative to the current directory,
# independently of the target name.  If you use ``%`` in `CONFIG`, it will be
# replaced with the target name (without extension) and it will be
# interpretted relative to the target's directory -- giving you per-file
# configs.
$(docutils.)CONFIG ?=

# I found absolutely no way to implement in make per-directory config file
# dependencies that don't depend on the target basename.  You can just do::
#
#     $(docutils.)FLAGS += $(*D)/config.file.name
#
# but it won't be considered a dependency (which is not such a big issue).  Or
# you can always run make in the directory of the target...

# You can provide extra docutils options by setting variables named
# `<toolname>.FLAGS`.  `FLAGS` gives default flags for all tools.
$(docutils.)FLAGS += $(foreach c,$($(docutils.)CONFIG),--config=$(subst %,$(*D)/,$(findstring %,$(c)))$(subst %,$(*F),$(c)))
$(docutils.)RST2HTML.FLAGS += --stylesheet=style.css $($(docutils.)FLAGS)
$(docutils.)RST2LATEX.FLAGS += $($(docutils.)FLAGS) --stylesheet=mgunit-docs.sty --literal-block-env=lstlisting
$(docutils.)PEPTOOL.FLAGS += $($(docutils.)FLAGS)


# Extra dependencies
# ==================

# When docutils config files change, it usually affects docutils' so it should
# be rebuilt.  So we add them as dependencies.
# 
# .. note:: Deletion of a config file will *not* cause a rebuild.

# Figure out the default config files from the environment:
DOCUTILSCONFIG ?= /etc/docutils.conf:./docutils.conf:$(HOME)/.docutils

# You can set `CONFIG_DEPS` to override the depencies on config files without
# changing the actual config files used by docutils.  It's space-separated.
$(docutils.)CONFIG_DEPS ?= $(subst :, ,$(DOCUTILSCONFIG)) $($(docutils.)CONFIG)

# `EXTRA_DEPS` specifies the actual extra dependencies.
#
# Config files that exist are automatically included (unexistant ones would
# cause make to complain that it doesn't know how to build them).
$(docutuls.)EXTRA_DEPS += $(wildcard $($(docutils.)CONFIG_DEPS))

# Note also that you can supply extra dependencies for pattern rules by
# yourself, as long as you don't provide commands, e.g. ::
#
#    foo.html: extra_deps
#
# Typical extra depencies you'd want to add: HTML stylesheets (if you embed
# them), files appearing in ``.. include::``.


# HTML output
# ===========

# pep-%.html must be before the %.html rule to get higher priority.
pep-%$($(docutils.)PEPTOOL.TRGEXT): pep-%$($(docutils.)PEPTOOL.SRCEXT) \
				    $($(docutils.)EXTRA_DEPS)
	$($(docutils.)PEPTOOL) $($(docutils.)PEPTOOL.FLAGS) $<
ifneq "$($(docutils.)PEPTOOL.TRGEXT)" ".html"
	# $($(docutils.)PEPTOOL) lacks output file name control, work around.
	mv $(basename $<).html $<
endif

%$($(docutils.)RST2HTML.TRGEXT): %$($(docutils.)RST2HTML.SRCEXT) \
				 $($(docutils.)EXTRA_DEPS)
	$($(docutils.)RST2HTML) $($(docutils.)RST2HTML.FLAGS) $< $@

# LaTeX output
# ============

%$($(docutils.)RST2LATEX.TRGEXT): %$($(docutils.)RST2LATEX.SRCEXT) \
				  $($(docutils.)EXTRA_DEPS)
	$($(docutils.)RST2LATEX) $($(docutils.)RST2LATEX.FLAGS) $< $@

# LaTeX processing rules
# ----------------------

# This part is not fully parametrized; it's not related to docutils so if you
# want to get fancy in this respect, provide your own rules.  You can disable
# the rules here, by setting `ENABLE_LATEX_RULES` to 0.
$(docutils.)ENABLE_LATEX_RULES ?= 1

# PDFLaTeX does a better job than LaTeX->DVIPDF (e.g. it supports hyperlinks
# and generates a PDF outline) but you usually can't run the same file through
# both LaTeX and PDFLaTeX because they don't understand a single common
# format.  Solution: there is a separate preprocessing stage
# PDFLATEX_WILD_EXTS.  Set this to 0 to go through DVIPDF.
$(docutils.)ENABLE_PDFLATEX ?= 1

ifeq "$($(docutils.)ENABLE_LATEX_RULES)" "1"

# These variables are common-practice but it's still cleaner to put them in
# the "namespace".

$(docutils.)LATEX ?= xelatex
$(docutils.)PDFLATEX ?= xelatex
$(docutils.)DVIPS ?= dvips
$(docutils.)DVIPDF ?= dvipdf

%.pdf: %.tex
	cd $(*D); $(LATEX) $(*F)
	cd $(*D); $(LATEX) $(*F)

endif # ENABLE_LATEX_RULES

# Fallback when you don't provide for different PDFLaTeX processing.
%$($(docutils.)RST2PDFLATEX.TRGEXT): %$($(docutils.)RST2LATEX.TRGEXT)
	cp $< $@


# Typical standard targets
# ************************

# This section provides typical rules for processing documents with docutils.
# Since they might clash with your rules, they are optional and can be
# disabled by setting `ENABLE_COMMON_TARGETS` to ``0``.
$(docutils.)ENABLE_COMMON_TARGETS ?= 1

# `DOCS` gives the documents to process.  You should typically set this
# (defaults to all files with the source extension in current directory).
$(docutils.)DOCS ?= $(wildcard *$($(docutils.)SRCEXT))

# `STEMS` is the docs list without the source extension, (makes rules shorter).
$(docutils.)STEMS ?= $($(docutils.)DOCS:$($(docutils.)SRCEXT)=)

# Set `ALL` to change the things to build by default.
$(docutils.)ALL ?= html pdf

ifeq "$($(docutils.)ENABLE_COMMON_TARGETS)" "1"

docutils.all: $($(docutils.)ALL)

# Targets like ``clean`` weren't directly used.  Rather they don't have
# commands but have targets like ``docutils.clean`` (that do have commands) as
# prerequisites.  This allows you to give your commands for them.  You can
# inhibit these alias dependencies by setting `ENABLE_SHORT_TARGETS` to 0.
$(docutils.)ENABLE_SHORT_TARGETS ?= 1

ifeq "$($(docutils.)ENABLE_SHORT_TARGETS)" "1"
all: docutils.all
safeclean: docutils.safeclean
mostlyclean: docutils.mostlyclean
clean: docutils.clean
endif

html: $($(docutils.)STEMS:=.html)
tex: $($(docutils.)STEMS:=.tex)
dvi: $($(docutils.)STEMS:=.dvi)
ps: $($(docutils.)STEMS:=.ps)
pdf: $($(docutils.)STEMS:=.pdf)

# Extensions of unneeded byproducts (specifically, LaTeX byproducts).
$(docutils.)SAFECLEAN_EXTS += .log .aux .out .toc

# Extensions that are direct outputs of this makefile.
$(docutils.)CLEAN_EXTS += $(foreach tool,$($(docutils.)TOOLS),$($(docutils.)$(tool).TRGEXT))
$(docutils.)CLEAN_EXTS += .dvi .ps .pdf

# `safeclean` cleans only unneeded byproducts.
docutils.safeclean:
	-rm -f $(foreach ext,$($(docutils.)SAFECLEAN_EXTS),$($(docutils.)STEMS:=$(ext)))

# `mostlyclean` cleans almost everything.
docutils.mostlyclean: docutils.safeclean
	-rm -f $(foreach ext,$($(docutils.)CLEAN_EXTS),$($(docutils.)STEMS:=$(ext)))

# `clean` also cleans imgmathhack images that take a lot of time to rebuild.
docutils.clean: docutils.mostlyclean
ifeq "$($(docutils.)ENABLE_MATHHACK)" "1"
	-rm -rf ./imgmath/
endif

endif # ENABLE_COMMON_TARGETS